Types of CORROSION PROTECTION
* RUSTOVERT: Polymeric bituminous rust-converting coating
One component ready to use, water-based material
Converts rust & passivates the surface
Excellent adhesion to the surface
Easily applied by brush, roller, or spray
An advantage of the product is that gunniting rebound loss is reduced
* RUSTICIDE: Rust remover and passivator
Conforms to I.S. 9077-1979 (reaffirmed – 1997) Appendix B, Clause 5.3.3 for the application procedure
RUSTICIDE performs rust removal and rust prevention in one operation in mild conditions
* POLYALK FIXOPRIME: Rust-preventi

Types of EPOXY PRIMERS
* SUNEPOXY PRIME: Multi-purpose epoxy primer
Non-toxic and safe for water and food contact
Abrasion-resistant and durable film
Excellent chemical and solvent resistance
Strong adhesion to various surfaces
Waterproof and protective coating
Suitable for both concrete and metal substrates
* SUNEPOXY ZP PRIMER: Two-component, anti-corrosive, high build, zinc phosphate epoxy primer
Epoxy primer for ferrous and non-ferrous metals
Excellent water and corrosion resistance in the industrially polluted and saline atmosphere
Good adhesion to steel, galvanised steel, an

Types of EPOXY COATINGS
* SUNEPOXY PAINT: Epoxy paint for external applications
Abrasion-resistant film
Excellent chemical resistance
Excellent adhesion to many surfaces
Equally effective on concrete or metal substrates
* SUNEPOXY HB: Non-toxic, solvent-free, high-build epoxy coating
Non-toxic, solvent-free, zero VOC, and safe for potable water and foodstuff
Abrasion-resistant, tough, and durable film
Excellent chemical and solvent resistance
Excellent adhesion to many surfaces
High-build coating
It provides excellent vapour & gas barrier
Waterproof protective coating
Equally ef

Types of EPOXY RESIN SYSTEMS
* SUNEPOXY 358: Two-component, high-viscosity epoxy resin
Tough abrasion, chemical-resistant film
Excellent adhesion to many surfaces, including concrete or metal substrates
Formulated specially to provide high chemical resistance
* SUNEPOXY 368: Two-component, low-viscosity epoxy resin [injection grout material]
The use of cement grout may not be efficient due to high shrinkage, low bond, and tensile strength
Hence, very low-viscosity epoxy injection grout often solves the problem and provides structural integrity
High bond strength, good tensile strength

Types of POLYURETHANE COATINGS
* SUNPUGARD: Two-component UV-resistant, polyurethane coating
Excellent chemical and abrasion resistance
Its good adhesion justify to concrete and a variety of other surfaces makes it an ideal choice for coating
* SUNPUGUARD SPL: High-build polyurethane coating
Abrasion resistant film
Chemically and UV resistant
Good corrosion resistance
Excellent adhesion to various surfaces
Effective on concrete and metal
Retains color and gloss well
Suitable for concrete and metal surfaces
Ideal for coating MS pipelines and structural steel

Types of EPOXY FLOORINGS AND FLOOR COATINGS
* SUNEPOXY SL UNDERLAY: Self-leveling epoxy-based monolithic underlay flooring
Easy to apply
Flowable consistency for self-leveling application
Non-shrink and solvent-free
Provides excellent adhesion to many surfaces, including concrete and metal substrate
Excellent resistance to chemicals
Superior abrasion resistance
Nuclear grade
* SUNEPOXY SL TOPCOAT: Flow-applied epoxy resin-based monolithic floor topping
Easy to apply
Flowable
Self-leveling, glossy
Excellent resistance to a wide range of chemicals
Excellent abrasion resistance
It

Types of POLYURETHANE CONCRETE FLOORINGS
* SUNCRETE PU MF: Polyurethane-concrete flooring system
Easy to apply
Fast curing, therefore, minimizes downtime
Excellent resistance to a wide range of chemicals
Excellent abrasion resistance
It provides a dense, impervious, seamless floor surface that can be easily cleaned
Available in a select range of colours to enhance the working environment
* SUNCRETE PU HF: Polyurethane-concrete heavy-duty flooring system
Easy to apply
Fast curing, therefore, minimizes downtime
Excellent resistance to a wide range of chemicals
Excellent abrasion res

Discover the beauty of the Mardi Himal Trek in Nepal. Explore stunning trails, lush forests, and majestic mountain vistas. Experience cultural encounters.

The Mardi Himal Trek is a relatively short and less crowded trekking route located in the Annapurna region of Nepal. This trek offers stunning views of snow-capped peaks, lush forests, and picturesque villages. Starting from the beautiful city of Pokhara, the trek typically takes 5 days to complete, depending on the itinerary.

The trail passes through rhododendron forests, alpine meadows, and high-altitude landscapes, providing opport

Types of CONCRETE REPAIR MATERIALS
* POLYALK SB: SBR latex-based bonding agent/mortar modifier
Improves elasticity, flexibility, and tensile strength
Easy to use, non-toxic, and plasticising mortar
Inhibits cracking, improves surface hardening, limits wear and dust production
* POLYFILL AR: Elastomeric acrylic crack filler
No bonding coat or curing is required
Excellent flexibility and good resistance to UV rays
The excellent adhesion property
Sufficiently smooth finish, suitable for further painting application
One pack easy to use, non-shrink putty
* SUNMIX: Single component read

Types of BONDING AGENTS FOR PLASTER, CONCRETE, AND GYPSUM
* HACK AID PLAST: Bonding agent for plaster and glazed tiles
Holds the concrete tightly due to interaction polymerization
The bond strength increases after curing
Preserve the bond between steel and concrete
Non-ionic; hence, no possibility of an attack on concrete by ions like chlorides, alkali sulphates, etc
* HACK AID PLAST SPL: Acrylic bonding agent for PCC-based plaster
Holds the concrete tightly due to interaction polymerization
The bond strength increases after curing
Preserve the bond between steel and concrete
Non-io

Types of BONDING AGENTS FOR AAC (AUTOCLAVED AERATED CONCRETE) AND CC (CEMENT CONCRETE) BLOCKS
* POLYALK SUPERBOND U: Bonding Agent for AAC Block to AAC Block & CC Brick Block to CC Brick BlockUsed for CC bricks compound wall for bonding
The above process is done without the use of cement mortar and any need for water curing
It can be used in the area where there is scanty rainfall as well as a shortage of good-quality sand
As the polymer cures, the bond strength also increases
Non-ionic; hence, no possibility of an attack on concrete by ions like chlorides, alkalis, sulphates, etc
Will

Types of GROUTS
* POLYEXPANSE: (M-45/M-65/M-80) Non-shrink free flow cementitious grout
Ready-to-use, flowable, self-leveling
Non-shrink
Provides excellent bearing
No reinforcement corrosion, discolouration, or efflorescence
Positive expansion of 1 to 2%
* SUNEPOXY 300: Low exotherm, high strength epoxy resin free flow grout
Non-shrink; hence offers excellent adhesion to many surfaces, including concrete and metal substrate
Low creep characteristics under sustained loading
High compressive strength, tensile and flexural strength
High resistance to dynamic loads and chemical attack

Types of CONCRETE ADMIXTURES
* POLYTANCRETE SPR: Slump retaining retarding superplasticiser
Conforms to IS: 9103:1999 and ASTM - C 494M - 99a, 1999 type G
Increased workability with reduced water
Flowing yet very cohesive
Easy to pump
High early strength due to high water reduction
Chloride free
* POLYTANCRETE NGT: Superplasticising admixture
Conforms to ASTM C 494 type F & IS 9103 for chemical admixture
Reduce water-cement ratio while maintaining workability
Increases strength of the concrete/ mortar by reducing water content

Types of INTUMESCENT PAINTS
* SUNNOFLAME IP: Water-based intumescent coating for structural steel
Fire-retarding interior coating
Reduces heat penetration, flame spread, and smoke generation
Applies like regular paint
Water-based with low VOCs
Durable, smooth architectural finish
Quick and easy application and clean up
Forms a thick cellular char blanket to retard the flame spread
* SUNNOFLAME IP 1709: Epoxy-based intumescent coating for structural steel
Reduces heat penetration, retards flame spread, and minimises smoke generation
Quick and easy application
It provides high hidin

Types of CURING AIDS
* SUNPOLICURE W: Water-based curing compound
Conforms to ASTM C 309-74
Works during a shortage of normal water or salt-free water
Shortage of labour
Controls additional costs involved in curing for the full specified period
* SUNPOLICURE I: Internal curing admixture
SUNPOLICURE I reduce water curing time.
Enhances concrete impermeability.
Decreases plastic shrinkage and long-term drying shrinkage.
Improves workability and pumpability of concrete when used with superplasticizer.
Prevents water evaporation from fresh concrete or mortar.
Enhances hydration of all

Types of TILE ADHESIVES AND TILE GROUTS
* POLYALK TF: Bonding agent for fixing all types of tiles
POLYALK TF can be easily mixed with white or grey cement
The matrix is watertight and has additional flexural and tensile properties
Tiles can be fixed on either dry or wet surfaces without any loss of bond strength
Fallen tiles may be re-fixed without disturbing the adjoining tiles
* POLYALK TA: Polymer-modified cementitious tile adhesive application
Conforms to BS 5980 –1980
Ready to use; only add water at the site
It can be applied directly on the substrate or tile in a single layer r

Types of FLOOR HARDENERS AND DENSIFIERS
* SUNFLORMETALLIN: Liquid surface hardener and dust proofer
Any surface oil from concrete floors can be easily removed
Water penetration and absorption were slightly reduced.
* POLYABRES: Dry shake non-metallic floor hardener [a ready-to-use 'dry shake on' product]
Conforms to ASTM C 418/ C 779
It is formulated with select cementitious binders
Formulated with added polymeric property enhancers and tested aggregates of proven hardness
Excellent abrasion resistance and impact resistance
Hard-wearing, resistant to mineral oils, non-slip, non-skid,

The most striking feature of alstroemeria plants is undoubtedly their exquisite blossoms. Buy alstroemeria Australia that are available in a myriad of colors ranging from soft pastels to vibrant hues, these flowers add a splash of brilliance to any outdoor setting. Imagine a garden adorned with clusters of delicate blooms in shades of pink, red, orange, yellow, and white, each petal delicately streaked with contrasting markings—a sight to behold and a source of endless delight for garden enthusiasts and passersby alike.

Our laser welding machine is the ideal answer for individuals seeking a dependable and efficient method of welding metals. Aluminium, stainless steel, steel plate, iron plate, and other metals and alloys are all suitable for use. Red light rapid positioning, CCD display, and optional microscope. The adjustable working table enables for welding of workpieces of varying size. Heating causes a slight distortion. Low noise and maintenance costs, no emissions, and a long operational life. For additional information, please contact us immediately!

Perfectly Clean is the top office cleaning company in Melbourne. We prioritize creating a clean and organized workspace for your business. Elevate the cleanliness and professionalism of your office with our top-notch office cleaning services in Melbourne. Perfectly Clean is the top office cleaning company in Melbourne. We prioritize creating a clean and organized workspace for your business. Elevate the cleanliness and professionalism of your office with our top-notch office cleaning services in Melbourne.